SINGLE AND TWO PACK FLOOR PAINTS                                    Image
 
Single-pack products
Contract Finish
...ideal for fast turnaround applications in factories and commercial areas requiring a hard wearing full gloss finish.
Non-Skid Deck Paint
...low profile, non-slip surface which is easily applied to areas where sure foot conditions are essential.
...metal and wood deck areas of seagoing vessels, wet and slippery walkways and production environments, where minimum interruption can be tolerated.
Polyurethane Finish
...a medium duty, economical industrial floor coating based on a modified polyurethane alkyd.
...ideal for fast turnaround applications in workshops, offices, factory floors, garages, showrooms and warehouses where a cost effective but oil and chemical resistant finish is required.
Rubberised Finish
...chlorinated rubber floor coating with high chemical resistance. Resists acids, alkalines, oxidants and chemicals. Resistant to high humidity, water and aggressive exposure conditions.
...ideal for farm buildings, abbatoirs, pickling and plating areas, chemical environments and general factory areas requiring good floor grip.
Floorcote Super Trident
...a water based single pack floor coating based on an acrylic co-polymer containing a mineral aggregate and durable light-fast pigments.
...designed for internal or covered areas for light or medium foot traffic, where a decorative and slip resistant finish is required.
Floor Paint Gloss (APG)
...a range of fast, air drying enamels designed for the coating of concrete floors, suitable for most types of application.
...tough, wear resistant film coating which provides ideal floor protection for workshops, showrooms, storage areas and garages.
...low slip additives available.
Industrial Floor Paint
...a single pack floor coating based on a specially selected blend of tough chemical resistant modified alkyds, combined with durable pigments, giving a fast hardening and wear resistant finish.
...can be applied to most floor areas including workshops, offices, factory floors, showrooms and warehouses where a cost effective but oil and chemical resistant finish is required.
Line Marking Paint
...single pack fast drying highly durable moisture resistant resin formulated with high quality pigments giving a very versatile road line marking coating.
? Fast drying minimises down time
? Can be reflective by addition of reflective glass beads
? Highly durable
? Range of bright, fade resistance colours
? Suitable for asphalt and concrete substrates
Typical uses in line marking of:
? Railways, Ports, Factories, Schools, Warehouses and Runways
? Car parks and Car parking bays
? Roads and Tennis Hardcourts
? Kerbs, Stair-treads etc

Usually a one-coat system
Two-pack products
Floorcote AQ200 Finish
...suitable for application where low odour and minimum solvent conditions are important e.g. schools, hospitals. The product can be applied to wood, concrete, stone, tiles and previously painted sound surfaces.
 Epoxy Finish
...ideal for decks, walkways, heavily used wet areas, factories subject to heavy traffic (fork lift areas) and transport depots where maximum resistance to abrasion, chemicals, sea water, solvents and high humidity are required.
Solvent-Free Epoxy
... suitable for application where low odour and no solvent vapour are important, especially schools and hospitals. Ideal for factories, chemical plants where heavy traffic (foot and fork lift) is expected.
Acothane Pour & Roll Grade (A2)
A two pack solvent-free polyurethane self levelling coating material.
Designed for application to steel and concrete, heavy duty flooring, grouting and encapsulation. Rapid drying and curing characteristics, allowing early completion of coating to recommended film thicknesses.
Epicol Solvent Free Epoxy
..two component epoxy coating for potable water, cured with a fast setting amine that is approved for site and factory use under the Water Byelaws Scheme.
...high build coating that has some self levelling properties makes it suitable also as a floor coating.
? Ductile iron pipes for the water industry
? Fixtures and fittings
? Valves used in the water industry
? Storage tank internals for drinking water or crude oil storage
? Floor coatings
Ancillary products
Degreaser
...a powerful degreaser based on a mixture of Aliphatic Hydrocarbon and emulsifying agents for fast removal of dirt, oil and grease.
Etch Treatment
...a Hydrochloric Acid based solution designed to open up dense concrete, neutralise newly laid concrete and remove surface laitance (soft, weak surface layer) quickly.
Epoxy Sealer
...sealing of new and damp concrete flooring areas prior to main coating. Can be used as a clear floor sealer in food factories, breweries, electronic plants, farm buildings, schools and hospital where solvent vapours may interfere with products and processes.
Rubberised Sealer
...penetrating, heavy duty rubberised sealer for application to unsound surfaces, such as cement, concrete, alkaline and dusty substrates to provide a tough, well bound base for subsequent Floorcote finishing coats.
Acothane LV Sealer (A10)
Two pack solvent-free polyurethane sealer for concrete.
Priming of concrete, plaster etc. prior to application of finishing system, or as a saturation coating for concrete.